Skip to main content

Search

Items tagged with: LoRa


#radioamateur #hamradio #APRS #LoRa #Igate #tracker

LoRa APRS – ajout du bilan radio dans les trames APRS

F4CZX et moi même utilisons le soft LoRa modifié par F4WATpour le Igate afin d'inclure le report dans les trames du tracker.


Entrer une description pour l'image ici

Entrer une description pour l'image ici

**


#radioamateur #hamradio #APRS #LoRa #Igate #tracker

LoRa APRS – ajout du bilan radio dans les trames APRS

F4CZX et moi même utilisons le soft LoRa modifié par F4WATpour le Igate afin d'inclure le report dans les trames du tracker.


Entrer une description pour l'image ici

Entrer une description pour l'image ici

**


This #PineCone #BL602 photo is Geocoded and Timestamped ... We'll match this with the log of #LoRa Packets received by #WisBlock
Imagen/Foto


Timestamp every #LoRa Packet received by #WisBlock ... We'll match these with the Geocoded Timestamped Photos that we'll snap as we walk ... It's like Pokemon Snap but for LoRa Packets

https://github.com/lupyuen/wisblock-lora-receiver/blob/main/src/main.cpp#L118-L140
Imagen/Foto


#LoRa #BL602 Field Test Kit ... #PineCone #RISCV BL602 @PINE64 with RF96 LoRa Transceiver ... In a Permeable Paper Box with Battery ... And #Pinebook Pro for Urgent Field Maintenance 😉

https://github.com/lupyuen/wisblock-lora-receiver
Imagen/Foto


#WisBlock receives perfect #LoRa packets from #BL602 ... We're done yay! 🎉 Tomorrow we shall take a walk ... And discover the real-world wireless range of LoRa!

https://github.com/lupyuen/wisblock-lora-receiver
Imagen/Foto


#WisBlock will receive #LoRa packets from #BL602 ... Let's sync up the LoRa Parameters across WisBlock and BL602 ... Life gets Easy with Serendipity! 👍

https://github.com/lupyuen/wisblock-lora-receiver/blob/main/src/main.cpp
Imagen/Foto


#WisBlock #Arduino Firmware for receiving #LoRa packets ... Runs OK with PlatformIO ... Code looks surprisingly similar to our BL602 LoRa code 🤔

https://github.com/lupyuen/wisblock-lora-receiver/blob/main/src/main.cpp
Imagen/Foto


Nope Airspy SDR couldn't sniff our #BL602 #LoRa at 923 MHz ... Though it sniffed others thru the Faraday Cage (erm) Pot 🤔

https://github.com/lupyuen/bl_iot_sdk/blob/lora/customer_app/sdk_app_lora/sdk_app_lora/demo.c#L220-L270
Imagen/Foto


#BL602 + #LoRa SX1276 + Airspy SDR ... Inside an improvised Faraday Cage 🫕 ... It really works!
Imagen/Foto


But today we shall spy on #BL602 + #LoRa ... With an #Airspy R2 Software Defined Radio 📻
Imagen/Foto


Someday we shall pack #PineCone #BL602 @ThePine64 with #LoRa ... Into this cute clear Junction Box
Imagen/Foto


#BL602 sends a #LoRa message ... By copying the message to SX1276 Transmit FIFO over SPI ... Was the message actually transmitted? Airspy will tell!

https://github.com/lupyuen/bl_iot_sdk/blob/lora/customer_app/sdk_app_lora/sdk_app_lora/demo.c#L107-L124
Imagen/Foto


How will we know if our #BL602 + #LoRa SX1276 are misbehavin’ on the airwaves? We got a spy ... An AirSpy Software Defined Radio

https://airspy.com/airspy-r2
Imagen/Foto


Our #LoRa SX1276 (actually RF96) is factory configured for 434 MHz, sez the Frequency Registers ... #BL602 will tune it to 923 MHz for Singapore

https://github.com/lupyuen/bl_iot_sdk/blob/lora/customer_app/sdk_app_lora/sdk_app_lora/demo.c#L199-L213
Imagen/Foto


#BL602 #SPI Unsolved Mystery ... BL602 must be configured for SPI Phase 1 to talk to #LoRa SX1276 ... But SX1276 actually uses SPI Phase 0! 🤔

https://github.com/lupyuen/bl_iot_sdk/blob/lora/customer_app/sdk_app_lora/sdk_app_lora/sx1276-board.c#L112-L137
Imagen/Foto


Yep #BL602 talks OK to #LoRa SX1276 over SPI ... SX1276 register values look correct ... Now let's transmit a LoRa Message!

https://github.com/lupyuen/bl_iot_sdk/blob/lora/customer_app/sdk_app_lora/sdk_app_lora/demo.c#L199-L213
Imagen/Foto


#LoRa SX1276 Driver listens for GPIO Interrupts on 6 (!) GPIO Pins ... Maybe #BL602 can defer this ... If we're not receiving LoRa Packets 🤔

https://github.com/lupyuen/bl_iot_sdk/blob/lora/customer_app/sdk_app_lora/sdk_app_lora/sx1276-board.c#L137-L185
Imagen/Foto


We'll port the #LoRa SX1276 Driver from #Mynewt OS to #BL602 IoT SDK ... Because the GPIO and SPI Hardware Abstraction Layers are quite similar

https://github.com/apache/mynewt-core/blob/master/hw/drivers/lora/sx1276/src/sx1276.c
Imagen/Foto

This website uses cookies to recognize revisiting and logged in users. You accept the usage of these cookies by continue browsing this website.